Carrollton, TX
Backflow Prevention Testing Carrollton, TX
Backflow prevention testing in Carrollton checks the device that keeps sprinkler water out of the water you drink. Flush Hour Plumbing, on Randolph Street, explains what your water utility is asking for and prices the test before it is done.
- Price first, work second
- Tested before we leave
The basics
A backflow assembly is a one-way gate built from spring-loaded check valves. Water passes from the city main into a branch of your plumbing, usually the lawn sprinklers, but cannot come back. Without it, a drop in street pressure could pull fertilizer, standing water or pool chemicals back into the drinking water supply. Texas requires backflow protection on irrigation systems connected to a public water supply.
The test uses a gauge connected to the assembly's test cocks to confirm that each check valve holds and that any relief valve opens at the right pressure. The test itself has to be carried out by a tester who holds a state backflow tester license, and the result is recorded on the form your water utility uses. An assembly that fails can usually be rebuilt with new springs and seals and tested again; one that is damaged or too old for parts is replaced.
When a backflow test is due
- A notice from your water utility asking for a test
- A sprinkler system that is new or just repaired
- Water dripping from the relief port on the assembly
- A device cracked or damaged by a freeze
- Buying or selling a house with an irrigation system
Your route
How the job goes
Read the notice
We go over what your utility is asking for and which assembly it refers to.
Price it
You hear the cost of the test, and of any likely repair, before anything is done.
Test the assembly
A test gauge checks each check valve and relief valve against the required pressures.
Rebuild or replace if it fails
Worn springs and seals are replaced, or the assembly is, and it is tested again until it passes.
Road conditions
The Carrollton angle
Backflow assemblies around Carrollton usually sit near the front of the house, either above ground beside the sprinkler supply or below ground in a small box. Above-ground ones are exposed to freezes, and an insulated cover helps. Each North Texas utility sets its own testing rules and schedule, so the notice from yours is the best guide to what is required and by when.
Quick answers
Backflow Prevention Testing: common questions
Why do I need a backflow test?
To show that the device protecting the public water supply still works. Utilities ask for a test when an assembly is installed and on a schedule they set, most often for irrigation systems.
What happens if my device fails?
It is usually rebuilt with a repair kit and tested again. If it is damaged or too old for parts, it is replaced. Until it passes, your utility may ask that the sprinklers stay off.
Who is allowed to test it?
In Texas, a tester who holds the TCEQ's license for backflow assembly testing. The tester's license number belongs on the test report, and it is fair to ask for it.
How to book backflow prevention testing in Carrollton
Ring (972) 734-3086 and read us the notice from your water utility, or explain why you want the assembly checked. Its location and what it protects are the next questions.
Service area
Backflow Prevention Testing near Carrollton
Carrollton is home base. These nearby cities have a page of their own.
Ready to take this exit?
Call and describe what is going on. The price shows up before the work does.
